How To Reset Your Home Security System In Logan
One perk of having your home security system hooked up professionally is that you seldom find a reason to concern yourself with it. With that being said, there could be a few instances where you have to reset your alarms in Logan. If you’re utilizing a smart command panel, a reset normally takes one or two taps of the touchscreen when you’ve experienced occurrences like battery changes, power outages, and false alarms.
Consult Your Instruction Manual Before Resetting Your Alarm
A word to the wise before you begin to reset your Logan home security system, consult your instruction manual ahead of time. You wouldn’t want to damage your home’s protection due to pressing something incorrectly. In addition, control panels may have changed if you upgraded from a numbered keypad to a modernized touchscreen interface. Keep in mind that if you’re struggling to reset your system, don't worry as you can always call your trusted security specialists.
Resetting Your Logan Home Security System After A False Alarm
Usually, a false alarm takes place as a result of a sensor that was tripped by accident. You are able to use the central hub or bring up the ADT mobile app and tap the shield image and submit your unique passcode to switch off the system when this occurs. You may receive notification from your security monitoring team, but simply inform them that it was a false alarm.
Resetting Your Alarm When Experiencing A Power Outage In Logan
When you lose power from lighting, strong winds, or other reasons, you could start to hear a beeping sound from your central command hub. That indicates that your security is being powered by the backup battery. To reset the alarm and halt the constant chirping, you should disarm/rearm the system.
But please note, if power is out for prolonged time frame, you could need a total reset of your system. Pay careful attention to the instructions in your user’s handbook -- normally by putting in your PIN number and tapping the off button twice -- and you should be running fine. You could keep hearing chirps from the backup power, as it may not cease until your battery is fully charged. Call your home security agent if you are still having difficulties with your ADT system 20 hours after your power is back on.
Reset Your Home Security System After Switching Out A Battery
Occasionally you need to switch out a battery powering one of the devices in your security installation. When this needs to be done, you will set your alarm system to test mode so you avoid triggering a false alarm. When the you replace the old battery, change the alarm out of test mode and resume normal operations. If the control panel is unable to recognize the piece of equipment or the battery indicator is still on, you could have to perform a full reset of your security system.
Resetting Your Logan Security System After Adding Or Deleting A User
The addition and deletion of users can be accomplished on your ADT Command interface and the ADT Control mobile app. You won’t need a resetting of your system when deleting or adding a user or code. But you should note, if you move into a new property that already has an ADT security system, you need to call your residential security experts at (435) 393-6672 to establish a new service. The technician will go on site to replace equipment, install additional components (if needed), and perform a full reset.
A Well-Designed Security System Is Only A Call Away
Figuring out how to reset a home security system in Logan is a challenge if it fails to include clear instructions and features. If you’re ready to find your easy-to-use alarm system, call (435) 393-6672 or submit the form below. Our specialists are ready to customize the perfect security system for your property.